|
|
Liberty Labs, Inc. and
Austrian Research Centers Gmbh - ARC Research have joined to provide the
North American EMC Laboratories with a distribution service for the POD Antenna
Set, RefRad, RefRad X, Precision Reference Dipole, and CalStan software packages.
RefRad X - Coming soon, Summer 2008!
RefRad X is a battery operated field source and comb generator for producing a well
defined signal to test the performance of EMC and EMF measurement systems from 10
kHz to 3GHz.
RefRad X guarantees fulfilment of ISO 17025 requirements for the regular check of
test eqipment, and avoids costly retesting by detecting defective measurement instruments
prior to testing.
RefRad Model 3000 and antenna coupler
RefRad 3000 was designed
to be a rapid system "check out" for an EMC test system. This is accomplished
by generating a well defined field in close proximity to the receiving antenna.
This validates the proper performance of the radiated emission test path for the
testing engineer.
Option R1 RefRad Model 3000 for coaxial
system checkout and radiated functional Check.
Including: RefRad
model 3000, battery charger, protective attenuator, with monopole antenna, documentation
and transportation case
Option R2 RefRad Model 3000 for system
checkout of Field Nose Basic System using Austrian Research Centers Gmbh - ARC PCD 8250 or PCD 3100 antennas.
Including:
System R1 with antenna coupler CU8250
Option R3 RefRad Model 3000 for system
checkout of EMC radiated emission setup.
Including: System
R1 with 1 antenna coupler for your EMC receive antenna (please specify type)
Components and Options for RefRad Model 3000
RefRad Model 3000,
comb generator with 1 MHz line spacing, 1 MHz - 3 GHz
Battery Charger for RefRad Model 3000 comb generator
Protective attenuator, 20dB, N connectors. To protect the analyzer input
for coaxial measurements
Monopole Antenna, N male connector
Antenna Coupler CU8250 for precise system checkout with PCD 3100 and PCD
8250 antennas
Antenna Coupler are (or will be soon ) available for the following antennas:
-
Biconical: VHA 9103B,
VHBB 9124, EMCO 3109, EMCO 3110, KH116
-
Log. Periodic: UHALP
9108A, VULP 9118A, EMCO 3146, EMCO 3148, HL223
-
Bilog: CBL 6111A,
CBL 6112A, CBL 6141A, VULB 9160, VULB 9163, EMCO 3142, ARA LPB 2513/A
-
Active: HE200
The list is growing continuously, please inquire if a coupler
for your antenna is already available off the shelf. Austrian Research Centers Gmbh - ARC can manufacture
couplers upon request when you can send the antenna in for development (antenna
needed approximately 1 week at Austrian Research Centers Gmbh - ARC)
POD 16 and POD 618 Antenna Set
The POD 16 & 618 are precision broadband dipole antennas with conically shaped
radiation elements covered by RF-transparent radome (patented). This rugged construction
enables excellent omnidirectional, dipole like radiation pattern up to 18GHz. The
POD set meets the requirements of the new CISPR 16-1-4, site validation procedure
for 1-18GHz. The POD antenna set when purchased with the antenna mast and base provide
the ability to make fast precise measurements for polarization & distance changes.
Components and Options for POD 16 and POD 618 Antenna
SetPOD Antenna Stand, designed
for site validation measurements according to CISPR 16-1-4 requirements
Accredited ÖKD calibration,
calibration of radiation pattern and antenna factor (1° resolution, 1 GHz steps)
RF cables and transport case
CalStan 10.0 - RF Measurement Software
CalStan 10.0 is a software tool for automation of RF calibrations and measurements
of EMC test sites and equipment. The software controls instruments via GPIB,
reads the measurements and computes the results. CalStan offers a comfortable
interface, modular concepts for measurement typs and device drivers and report generation.
A full list of supported test instruments can be found at:
www.seibersdorf-rf.com/calstan
Precision Reference Dipole Measurement Antennas (PRD)
PRD Set: Pair of
Precision Reference Dipoles for the frequency a range of 30 - 1000 MHz set with
software antenna for numerical calculation of antenna factors or site attenuation
between pairs of PRD antennas.
Including: 2 baluns,
connector SMA (f) 2 mounting bases 30 - 250 MHz 2 mounting bases 300 - 1000 MHz
Antenna elements (4 of each) for the frequencies 30, 35, 40, 45, 50, 60, 70, 80,
90, 100,120, 125, 140, 150, 160, 175, 180, 200, 250, 300, 400, 500, 600, 700, 800,
900, 1000 MHz balun thru calibration fixture instructions table of free-space antenna
factors at the resonance frequencies software ANTENNA for AF and SA calculations
transport case
PCD 3100: Precision
Conical Dipole Antenna is a highly accurate antenna for the frequency range 30 MHz
to 1 GHz (continuous) for validation of fully anechoic EMC test sites (e.g. prEN
50147-3).
Including: antenna,
transportation case, and individual free-space calibration data from Austrian Research Centers Gmbh - ARC
PCD 8250: Precision
Conical Dipole Antenna is intended for field strength measurements next to mobile
communication facilities (e.g. GSM base stations, DECT, UMTS, broadcast stations).
It covers a frequency range for 80 MHz up to 3 GHz. The antenna is designed for
excellent "dipole like" antenna pattern up to 3 GHz and robustness for every-day
use in fieldwork.
Including: antenna,
transportation case, and typical free-space antenna factor
PBA 320: Set Pair
of Precisions Biconical Antennas is intended for NSA measurements to validate the
performance of emc test sites (e.g. EN 50147-2) in the frequency a range 30 MHz
- 200 MHz.
Including: 2 antennas
individual calibration data for NSA testing (sum of antenna factors): 10 m distance,
1m and 2m height in horizontal pol. 1m and 1.5m in vertical polarization.
Other configurations possible upon request
Liberty Labs, Inc. can
also provide an A2LA Calibration at the time of
purchase for a 40% discount on a normal calibration charge.
Please call Chris
at (712)773-2199 to
ask about an item or
Request A Quote
|
Copyright 2003 All Rights
Reserved Liberty Labs, Inc.
1346 Yellowwood Rd., P.O. Box 230 Kimballton, IA 51543
Questions?
Comments about our website? Please email
webmaster@liberty-labs.com
|
|
|